Craft Buddy Brand Ambassador

Wednesday, 1 October 2014

"Smile" photo frame using Stix2 Anything.

Good morning, I can't believe the weather this morning. I keep thinking we are going to end up over the rainbow, the wind is so strong. We are out of summer for sure. It a prefect day to get into my craft room with the heating on and a few films on - perfect for some Christmas films.  
 I had this frame kicking about so put a picture of me and DJ in it and decorated it. If you don't know, DJ is the family dog, he's a black lab and he lives with my mum who's lives 2 mins away. When mums at work or away down south visiting my stepdad who works away, I take DJ, I adore him. We were in the back garden in the summer time, lying down when I took a picture of us both, it was perfect timing as he stuck his tonge out. Makes me laugh every time. 
The products I have used are;

 Stix2 products;
Die cut plain white flower - S57299.
Die release sheets - 57316.
5mm foam pads (for candi) - 57083.
Silicone glue - S57235.
Hot glue gun - S57234.
Glue gun sticks - S57235.
Craft sheet - S57132.

 Additional products;
Diecut quilling flowers - Kanban Crafts.
Morning dew drops - Kanban Crafts.
Swirl die - Tonic Studios.
Tonic petal pairs (4 made up) - Tonic Studios.
Dark Aqua textured card - Bazzill Basics. 
Card Candi - Craftwork Cards.
Spray and sparkle - Crafters Companion.
Spun sugar - Tim Holts distress ink pad.
Peacock feathers - Tim Holtz distress ink pad.
Quilling tool. 

PLEASE NOTE - I attach all the element to frame step by step. 

1- I tool 6 die cut flowers and coloured 3 of them on my craft sheet using a ink distress tool and spun sugar ink pad. Then coloured the other 3 using the peacock feathers. Give a quick pray of spray and sparkle.

2- I lay my swirl die down on the ebosser magnetic sheet. Placed a small piece of the die release sheet on top, then placing my card stock on top of that. Running it through your Ebosser or chosen die cutting machine. Have done this 4 times so I have 4 swirls.
 TIP - don't bin the release sheet swirl! One of the sides has a coating, so position it on a piece of white card stock. Lay a tea town on top and then using a very low heat iron, iron on top for a few seconds. Best to do this on your craft sheet ontop of a glass mat. Take the tea towel & swirl off. Then take your distress ink pad and tool and ink over the top. The swirl on the card resists the ink and your left with a lovely design. - imagine doing this with such detailed die, will look gorgeous. PLEASE BE CAREFUL WHEN DOING THIS. 

3- using your hot glue gun, Attach your die cut flowers ontop of the other, do this so that the spun sugar is ontop of the peacock feathers or vice versa. Then possision these and attach them to the frame.

4- Now take your swirls, and position them over the die cut flowers evenly. Once you are happy with the way it looks secure them with your hot glue gun. 

5- Then take your quilling flowers from Kanban Crafts, give them a spray of spray and sparkle and stick in the Center of the die cut flowers, covering up where the swirls have been attached with the hot glue. Place a morning dew drop in the center using silicone glue.

6- Add some card candi in the Center of your Petal Pairs and then attach them evenly over your layout using your glue gun. Add some card candi in the top right had side of your frame.




www.stix2.co.uk
Sales@stix2.co.uk


Monday, 29 September 2014

"Snow is Falling" A5 Card.

I have seen a card over on Pinterest that had a theme along the lines of this card. I loved the idea of it and wanted to make something along the same lines. It a simple and straight forward card, however it uses many of your crafty bits and bobs. 
 The products I have used are:

Stix2 Products (Product Code)  www.stix2.co.uk  Sales@stix2.co.uk
 Double sided tape runner - S56986.
 6mm Ultra strong red liner tape - S57090.
 Silicone Adhesive - S57100.
 2mm 3D foam pads - S57082.
 Craft dots - S56965.
 Craft sheet - S57132.

Additional Products.
 Christmas traditional 12x12 paper pad - Trimcrafts.
 "Tis the Season" clear stamps - Trimcrafts.
 Red Adorable Scorable - Hunkydory Crafts.
 Snowflake die - Tattered Lace.
 Card blank - Papermill Direct.
 Snowflake swirl punch around the page - Martha Stewart.
 10mm red organza ribbon with satin edged - American Crafts.
 Tuxedo black ink pad - Momento.
 Card candi - Craftwork Cards.
 

Craig 

"Seaside Dreaming" 12x12 scrapbook page using Stix2.

Good morning, hope everyone had a lovely weekend? This photo of dj is my absolute favourite, even though I have hundreds of him, it's just so natural and calming. Seeing him standing there In the sea looking at the water. I just love it So much I had it turned into a canvas when I re decorated my living room. If your a crafter and watch Mel Heaton, she will always tell you that when making your scrapbook page, always write a wee ditty about the picture and more importantly, hand write it so that years down the line, when generation are looking at it, they not only know about the picture, but they can see what your handwriting was like. 
 Over the weekend, I Have been perusing through Pintrest over the weekend for some differnt ideas. I seen someone had made a scrapbook page by cutting up a picture they printed into strips........that got my little brain ticking and how could I incorporate white textured bookmarks my Stix2. This way can use awee bit of your ink and you may find a better way to do it but this way is the easiest way for me. 
 1- Select the picture you like and print it onto normal cheap paper. Print it on a A4 sheet.

 2- Take 4 Stix2 bookmarks (product code; S57315) and trim them to 7". Make sure you trim the bottom and not the top as you want to keep the holes at the top. And using your Stx2 double sided tape or tape runner and run the adesive all the way round the back of your bookmarks.

 3- Taking your photo, place your 1st tag over the main focal point of your photo. Ie- my first tag I places over DJ and his shadow. Then taking the other 3 tags and line them up side by side ensure you leave a rough 5mm gap between each book mark. I placed mine uneven so it gives it more of an interest.
 
 4- Once all 4 tags are stuck down, run the paper through your printer again ensuring it prints the same direction as the first time. So basically your reprinting over your first photo.

 5- Once printer, either using your craft knife or scissors, cut the tags off your page and mat and layer on chosen coloured card stock. 

 6- Using a hole punch re-punch the holes at the top and feed ribbon through and then attach your bookmarks on your scrapbook page. 

Stix2 products used;
 Die cut bookmarks - Product code; S57315.
 High Tack ultra clear tape - p/c; 57084.
 Double sided tape.
 Layer perfect Metric - p/c; S57321.
 1mm A4 3D foam pad sheet.
 10mm hobby & craft dots - p/c; S57113.
 Craft sheet - p/c S57132.

Additional products used;
 "You & Me" love birds 12x12 page from lost & found. - My Minds Eye.
 Portobello road "You & Me" buttons - My Minds Eye.
 Dark blue textured card (2 12x12 sheets) - Bazzill Basics.
 Cream Textured card - Bazzill Basics.
 9mm dark blue satin ribbon - American Crafts.
 Blue Fine Liner.


Craig x

Friday, 26 September 2014

"Frosty the Snowman" A5 kanban card.

Afternoon, such a glorious day here at Carnoustie. I told dj for a lovely walk along the beach. I really do take the beach for granted. Don't realise how lucky we are to have it. If it was gone, I would very ,ugh miss it, I know dj would. He loves the sea. While heading down, we walked along the golf hotel front where they are currently setting up ready for the Dunhill Golf compitition. I'm not a golf fan and I don't watch it but I do love the atmosphere down there, especially the build up to a gold event. 
 

Home now, cuppa first, blog this and then out to my craft room. This is another card I have made from  an old Kanban Collection. Next year, my goal is to reuse lots of old collections I have. As I have many old Christmas collection, for all companies such as Hunkydory, crafters companion all to name a few, I thought it's best to start using old Christmas collection now for this year instead of waiting till next year to use them up, well attempt to use them up. 
 As always, My card has Stix2 Adesives used to being the card together. With Stix2, you will alway be guaranteed a permanent stick not matter what product of theirs you use. This is just one reason as to why I adore the Stix2 brand. The products I have used are;
 
Products used;
 Cool hugs topper and border sheet.
 Christmas sky - blue background card.
 Card blank - Papermill Direct.
 Silver mirri - Hunkydory Crafts.
 White pearls - Hunkydory Crafts.
 Snowfall embossing folder - Embossolicious crafters companion.
 25mm White satin ribbon - American Crafts.
 9mm Blue satin ribbon - American Crafts.
 
Stix2 Products;
 Layer Perfect.
 Double sided tape.
 1mm A4 foam pad sheet cut up.
 Ultra strong red liner tape.
 Hobby craft dots.
 Craft sheet.
 Pick up Pencil.
 A5 Cello Package bag. 

Thursday, 25 September 2014

"Walking in a Winter Wonderland" Hunkydory 7x7 Card.

With being on Hunkydorys Design Team, I receive many many gorgeous collections to play with. After making some samples for TV launch shows using them, I always have plenty left, with this Luxury Christmas collection is no exception. So having plenty of this collection left over I have been delving in and using it to make Christmas cards not only for myself but to also sell to help raise money for both NACC - National Association of Crohns and Colitis and to Dogs Trust UK. This small topper was left from the topper sheet, I made a 7x7 using some Duckegg foiled background card from HD. some centura pearl that I embossed and some mirri card. The products I have used are;

Hunkydory products;
 Winter Romance Topper.
 Christmas Greeting foiled duck egg background card.
 Duck egg Adorable Scorable.
 Silver Mirri card.

Additional products;
 Centura Pearl card - Crafters Companion.
 Snowflake Embossolicious Embossing folder - Crafters Companion.
 10mm Satin Duckegg ribbon - American Crafts.
 7x7 card blank - Craftwork Cards.
 Card Candi - Craftwork Cards.

Stix2 Adhesives products;
 3D foam pads.
 Micro dots.
 Ultra strong red liner tape.
 Silicone Glue.
 Craft sheet.
 Pick up Pencil. 


Craig X

Tuesday, 23 September 2014

"Let's celebrate the Season" 8x8 Christmas card.

Here is another card using the stamp from Woodware. Also on this card I have used their Christmas Greeting text stamp. Tried to keep this card with light festive colours. Just like the others, I haven't coloured it. I'm not the best at colouring, well shading with colours but I do love the look of plain stamped images. The products I have used are below;

Products Used;
 Holly Tree stamp - Woodware.
 Carol background stamp - Woodware.
 Traditional Christmas Greeting stamp - Woodware.
 X3 12x12 papers from back to basics Traditional Christmas pad - Trimcrafts/Dovecrafts.
 Light Greet textured card - Bazzill Basics.
 Green fine liner.
 10mm pokadot green satin ribbon - American Crafts.
 Stix2 Adhesives;
 3D foam pads, micro dots, ultra strong red tape, Silicone glue, craft mat amd Stencil sheet (to mask the tree) 


Craig 

"Rocking around the Christmas Tree" 8x8 card.

Lately I have been really enjoying stamping and getting all my pads and packs of papers out. Using my inks and distress inks. It can be really satisfying to have a stamp and papers and creating a lovely card. It gives me the chance to use lots of different crafty stash. The products I have used are;

Products used;
 Holly Tree stamp - Woodware craft collection.
 Traditional Christmas Greetings - Woodware craft collection.
 12x12 sheet - Back to Basics Modern Christmas paper - Trimcrafts.
 X2 6x6 sheets Back to Basics Vintage Christmas papers - Trimcrafts.
 8x8 Kraft card card blank - Docrafts.
 Cream Textured card -Bazzill Basics.
 Rich Cocoa ink pad - Momento.
 Festive Twine - Own Stash.
 Vintage Photo distress ink - Tim Holtz.
 Card Candi - Craftwork Cards.

 Stix2 Adhesives -
 3D foams pads.
 Double sided tape.
 Ultra Strong Double Sided tape.
 Silicone Glue.
 Micro Dots.
 Craft mat.
 Pick up pencil.